The Air Quality Egg Arduino Shield provides a lower cost way for those of you with a spare Arduino / Nanode(RF) to get started with monitoring air quality and joining in the global air quality crowd sourced data and discussion.
The Egg Shield is an Arduino shield with Temperature, Humidity, CO and NO2.
The sensor shield uses an ATtiny88 microprocessor to poll data from the sensors.
The Egg Shield is an Arduino shield with Temperature, Humidity, CO and NO2.
 |
| Air Quality Egg Arduino Sensor Shield |
To get started with the Sensor Shield follow these instructions.
As always the hardware and software is totally open-source, the hardware PCB CAD design & schematic, ATtiny88 firmware and example Arduino sketches can be found on github: https://github.com/jmsaavedra/Air-Quality-Egg/
The Air Quality Egg Sensor Shield is now available in the OpenEnergyMonitor shop.